Serge wogglebug 01 by ianboddy published on 2013/03/07 10:22:56 +0000 First day with the Make Noise Wiard Wogglebug. Using 3 random sources to create this strange, blippy patch. External Clock In of Wogglebug controlled by one half of Livewire Vulcan Modulator (square wave LFO) the rate of which is being controlled by Doepfer A-118 random voltage. Other side of Vulcan has a sine wave LFO > Heart In of Wogglebug. Stepped CV Out > Doepfer A-156 quantizer > Serge NTO sine wave > top section of Wave Multiplier (VCA mode) > Variable Q VCF (Low Pass) > Mix Out. A feed from the VQVCF also > WAD with Delay A & B outs mixed with dry VQVCF. Ring Mod Out of Wogglebug > a second VQVCF > In FM of NTO. Clock Out of Wogglebug > triggers DTG > VC F of first VQVCF. Other side of DTG is self cycling and triggering Serge SSG stepped random generator > VC FM amount on NTO (attenuated first). Random Burst Gate Burst of Wogglebug > VC Q of first VQVCF + VC F of second VQ VCF + triggering one half of a DUSG which > VC In of Wave Multiplier. This DUSG has it's rate controlled by the random SSG described above. The delay time on the WAD & the VC In (both) of the DUSG are controlled by the attenuated Woggle CV Out. An effects send feed > Cwejman SPH-2 spatial phaser > Doepfer A-199 Spring Reverb (with the original Doepfer spring tank). Totally self playing patch except at the very end where I pull the External Clock In of the Wogglebug out of the Vulcan Modulator LFO thus freezing the Wogglebug at that point for the fade out.